2024 Rhino Ag Equipment PA Series 8

Information

2024 Rhino Ag Equipment PA Series 8

Break up compacted soil and boost soil conditions.

The perfect tool for large-scale, agricultural aeration!

The PA Series pasture aerators' shanks lift and break up compacted soil. This helps with water and nutrient intake and can boost soil conditions.

The 4” x 4” x 5 /16” mainframe construction makes Rhino’s PA Series Aerators built tough for the long-haul. Our hydraulically adjustable transport wheel means easy movement over any terrain. The all-metal weight box welded to the frame Rotors can be adjusted 2 1/2°, 5°, & 7 1/2° depending on the toughness of your soil and the size of your job!

WARRANTY

Industry-leading toughness. Industry-leading warranty.

Rhino products are built to take on whatever you can throw at them. But if something should break, you’ll be glad to know our warranties are just as strong. See your local Rhino dealer for complete details.

FULL MACHINE WARRANTY

1 YEAR

Features may include:
  • 4” x 4” x 5 /16” Mainframe Construction
  • Hydraulically Adjustable Transport Wheel
  • All-Metal Weight Box Welded to the Frame
  • Adjustable Rotors to 2 1/2°, 5°, & 7½°
  • Heavy-Duty Greaseable Bearings

Photos

Highlights

  • Crossville, Tennessee
  • 2024
  • Rhino Ag Equipment
  • PA Series 8
  • Available

Specifications

  • 2024
  • Rhino Ag Equipment
  • PA Series
  • 8
  • Aerators
  • Tractor Required: 40-90 hp
  • 9.5L x 15 8-Ply Tires on 15” 5-Bolt Wheels
  • Heavy-Duty Pull-Type w/ Clevis Hitch 1.25" Maximum Pin Diameter
  • Tine Hub Spacing: 7.5" | Tine Penetration: Up to 8.125" Depending on Ground Condition | Frame Construction: 4" Square Tubing; All-Welded Construction | Main Tongue Beam: 4" Square | Hitch Jack: 10" Top Wind Jack-Mounted to Frame | Rotor Tine Support Hangers: 1" x 7" Heavy-Duty Hangers | Rotor Bearing Protection: .375" x 3.5" Metal Housing | Rotor Angle Adjustment: 2.5˚, 5˚, 7.5˚
  • 86"
  • (w/ Tines on Ground): 44.25"
  • 97.38"
  • 136" in Transport Position
  • 3.5" x 8"
  • Maximum: 2,900 Lbs. (Not Supplied)
  • (w/o Added Weight): 1,700 Lbs.
  • Number of Tines: 24 LH & 24 RH | Rotor Bearings: Heavy-Duty Greasable Bearings | Tine Depth Control: Add Spacer Donuts to Cylinder Rod—Included | Transport Lock: Manual Cylinder Lock | Rear Axle Pivot: Greaseable
  • Tine: Forged & Heat-Treated Steel